Wood-to-Gas Fireplace Conversion in Boerne, TX
Imagine your wood-burning fireplace giving you real flames at the flip of a switch — same beautiful focal point, none of the hauling, ash, or cleanup that keeps you from using it. Converting wood to gas is an engineered project, not just "add a burner": we size or reline the flue for gas, lock the damper open to code, run a BTU-correct gas line with a sediment trap, pressure-test before flame, and verify with a CO check. You get a centerpiece you'll actually light on a Tuesday — with the safety done properly underneath. Serving Boerne (3 ZIP codes, 20k residents) and surrounding neighborhoods with same-week scheduling.
Wood-to-Gas Fireplace Conversion in Boerne
A wood-to-gas conversion turns your wood-burning fireplace into gas — a vented gas log set, a sealed direct-vent insert, or vent-free — handled as an engineered project rather than just "add a burner." The appliance swap is the simple part; the venting changes, code damper lock, gas line, and CO verification around it are what make the difference between a clean, lasting system and a hazard hiding behind a pretty flame.
Local dossier · Boerne, TX
Out in Kendall County the fireplace usually has to hold its own against a view, and that changes how we design it. Boerne great rooms run tall — vaulted ceilings, limestone walls, windows aimed at the hills — so the fireplace is less a feature on a wall and more a piece of architecture: full-height stone chases, heavy timber mantels, fireboxes scaled up so they don't disappear at twenty feet. The town's German settlers built in rock starting in 1849, and the newer custom homes still speak that language. Engineering follows the ceiling height. A tall chase means a long flue run, and long runs need real draft math or the room smells like smoke every cold morning. Acreage properties off the gas grid run propane, which changes valve, orifice, and venting specs — details that get missed when a fireplace is treated as decor. Outdoor rooms are half our Boerne conversations, and Hill Country wind is a genuine design input for where a firebox can face. One thing we'll say plainly: a twenty-four-foot stone chimney is beautiful and expensive, and sometimes the budget does more good in the firebox and the mantel than in the stack. Every build, indoor or out, finishes permitted where required, code-checked always, and photographed for the file.
the Cibolo Nature Center
Why this matters in Boerne
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. On every one, the hearth is the visual anchor of the living space — and we service it like one. That local stock is exactly why our Boerne crews tailor wood-to-gas fireplace conversion to the homes here — not a generic checklist.
Common signs in Boerne homes
- Tired of hauling firewood, ash, and cleanup
- Want real-fire ambiance with a wall switch
- You want that heat-losing open fireplace working as a real zone heater
- Your wood firebox is still sound, but you'd rather burn something cleaner
Wood-to-Gas Fireplace Conversion in Boerne (Kendall County) — what's local
Boerne sits in Kendall County (county seat: Boerne). Kendall County's affluent Hill Country setting pairs historic Boerne masonry with large custom-home fireplaces and rural spark-arrestor work. For wood-to-gas fireplace conversion that means our Boerne crew sizes up the local housing stock before quoting — and follows Kendall County permit requirements for any work that needs an inspection sign-off.
Climate & code file · Greater San Antonio
San Antonio is not one fireplace market — it is a dozen of them stacked inside one city, and Space Fireplace Services serves them all to one unvarying standard. A century-old masonry hearth on a King William Victorian, a 1970s ranch firebox off Loop 410, and a builder-grade prefab in a 2015 Stone Oak subdivision are three completely different rooms built around three completely different fireplaces, and what makes the metro specific is the combination of light annual burn and long idle seasons — most homes light a handful of fires across a short, mild winter, then sit unused for nine months.
The rare hard freeze on porous stone
A Feb-2021-class freeze is the limestone killer: water already sitting inside porous stone expands and pops the face. The best defense is keeping water out of the masonry before the cold arrives — seal the breathable stone with a vapor-permeable siloxane repellent, never a film-forming coating that traps moisture inside and accelerates spalling at the next freeze.
Limestone & lime mortar — the one that matters most
If your Boerne chimney is older Hill-Country masonry, do not let a generalist repoint it with hard gray Portland. Soft limestone was laid in a breathable, high-lime mix that flexes with the stone; modern Portland is harder than the stone around it, so it transfers stress into the limestone and drives the cracking into the face — turning a repointing job into a stone-replacement job. We read the existing mortar, match its composition and color, and repoint so the repair moves with the wall through the heat-and-freeze cycle. That's the question budget crews don't even know to ask.
Cedar (Ashe juniper)
Cedar needles and the heavy December–February pollen pack into spark screens and crown washes — a clogged cap is a draft problem and a fire-screen failure at once. We clear and inspect the cap on every sweep. On wood-burners we also flag cedar's hot, fast, resin-heavy burn: it glazes a flue far quicker than seasoned oak, so a cedar-burning Boerne home needs a tighter sweep interval, not the generic annual default.
Long dormancy
A Boerne flue may sit unused for ten months, then get lit hard for six weeks — long enough for animals to nest, debris to collect, and a hairline crown crack to go unnoticed. A fall sweep-and-scan before the short burning season means your first cold-front fire is on a verified, clean, code-ready flue.
Code note · Greater San Antonio
South-Texas / Hill-Country code reality: porous historic stone is sealed only with a vapor-permeable siloxane repellent (never a film-forming coating), and a Feb-2021-class freeze event is the regional benchmark for the cracked-tile and open-joint damage a Level 2 scan exists to catch.
Built to code · Wood-to-Gas Fireplace Conversion in Boerne
Wood-to-Gas Fireplace Conversion is held to published national standards no matter the city. Our Boerne crew builds to these and documents the work; the locally-adopted code edition and permit requirements are confirmed with Kendall County's authority on every job.
- Damper permanently locked open — On a vented gas log conversion we permanently clamp the damper open or remove its plate entirely, so combustion products can never be trapped behind a closed damper above a live gas flame.
- Flue relined / sized for gas — Switch the fuel and you change the flue gas itself: its temperature, its volume, its acidity. That is why the masonry flue gets relined or downsized with a correctly-rated gas liner per NFPA 211, so it does not condense, corrode, or back-draft.
- Gas connection (NFPA 54) — Sizing the gas drop to the appliance BTU load comes first, then the NFPA 54 sediment trap and shutoff go in, and the line is pressure-tested by manometer before any flame.
- Sealed insert: positive connection — A sealed direct-vent insert gets a positive liner connection running from the appliance collar all the way to the cap; venting it into an open flue that condenses and back-drafts is never an option.
- CO check + ODS verification — Commissioning includes an ambient CO check with the unit operating, and if the conversion is vent-free, the oxygen-depletion-sensor (ODS) pilot is verified as well.
Scoped from a graded inspection
At Space Fireplace Services, a wood-to-gas fireplace conversion is never guesswork. We scope every job from a graded, photographed inspection first — the NFPA 211 level the evidence calls for — so the work is matched to what your flue and masonry actually need, with the report to prove it. The documented inspection is the record the wood-to-gas fireplace conversion is built on.
Chimney inspection in BoerneEvery wood-to-gas fireplace conversion in Boerne
Deliverables
- Flue relined or downsized to suit gas so it drafts cleanly instead of condensing or back-drafting into the room
- For vented log sets, the code-required damper clamp locked open, or the plate removed entirely where that's the call
- A BTU-correct gas drop finished with a sediment trap, a shutoff, and a pressure test before the flame ever lights
- Ambient CO check + leak test at commissioning
How a job runs
Assess
Look over the firebox, the flue size, and where the gas can come from, then choose the right path.
Vent
Right-size the flue, relining or downsizing as needed, then lock the damper open to code.
Connect
Run a BTU-correct gas drop with a sediment trap and set the appliance.
Commission
Pressure-test, leak-test, and run an ambient CO check before we hand it over.
4+ neighborhoods in Boerne
Same-week service across every neighborhood in Boerne. Don't see yours? Call (469) 992-4912 — if it's in Boerne, we cover it.
The Boerne advantage.
Our Boerne crew lives in the metro they serve, across Kendall County. They know which Boerne neighborhoods — Hill Country Village, Esperanza, Cordillera Ranch and more — have crumbling crowns, and which newer builds skipped the cap. Local code knowledge, local referrals, local accountability for every wood-to-gas fireplace conversion.
More services in Boerne
Wood-to-Gas Fireplace Conversion in nearby Kendall cities
We cover wood-to-gas fireplace conversion across Kendall County — same crew, same warranty. Nearby Boerne cities we also serve:
Wood-to-Gas Fireplace Conversion in Boerne — FAQ
I'd like to convert my wood fireplace to gas — what does that really involve?
A proper conversion is a sequence, not a burner swap. The flue gets sized or relined for gas, the damper gets locked open, which code requires for vented log sets, a BTU-correct gas line goes in with its sediment trap, and everything is pressure-tested before any flame. A CO check then confirms the room is safe to enjoy. That full chain is why the finished fireplace keeps performing instead of merely lighting.
Should I choose gas logs, a sealed insert, or electric?
Start with how you want the room to feel. Vented gas logs come closest to the character of a real open fire; a sealed direct-vent insert delivers the most heat and efficiency; electric asks nothing of you, no fuel, no maintenance. Our job is to fit the conversion to the way you will actually live with the room, not to steer you toward the biggest ticket.
If I'm switching to gas, why does the flue need work when the chimney's already there?
Your chimney was built around a wood fire, and gas is a different animal: different exhaust temperature, different volume, different acidity. Run gas up an oversized or mismatched flue and it condenses, corrodes, and back-drafts. Relining or downsizing to suit the new appliance is what keeps the conversion clean and safe, so it is never an optional line on the quote.
Can I convert back to wood later if I change my mind?
In many cases, yes, though it hinges on what your conversion involved. A removable log set walks back easily; a built-in sealed insert with a permanent liner does not. Before you commit, we spell out exactly how reversible your particular path is, so you choose with the full picture in front of you.
Is a vent-free gas conversion a good idea?
For the right space, it can be. Vent-free units run on an oxygen-depletion-sensor burner and need no chimney at all, which makes them appealing for supplemental heat. The trade-off is real, though: they release humidity and combustion products into the room itself. We are candid about where that works and where a vented or sealed unit serves the room better.
We're on propane outside Boerne — does that limit fireplace choices?
Not much. Nearly every unit we sell has a propane conversion or a factory propane spec — the differences live in orifices, regulators, and vent settings, not in the design catalog. What matters is doing the conversion by the book: Texas requires licensed gas fitters even in unincorporated Kendall County, and we document the whole setup in photos.
Wood or gas for a Hill Country great room?
Honest answer: wood fits the architecture and gas fits the calendar. A masonry wood fireplace with a real stone chase is the Hill Country look, but it's a five-figure structure. A sealed gas unit inside a stone surround reads nearly the same for far less, and it gets lit ten times as often. Come watch both burn before deciding.
Can you build an outdoor fireplace that doesn't smoke out the patio?
Yes, but placement is engineering, not preference. Hill Country evening wind rolls predictably, and an outdoor firebox facing the wrong way will push smoke at the seating no matter how pretty the stone is. We study orientation, firebox depth, and flue height against the roofline before drawing anything. Sometimes a fire pit is smarter — we'll say so.
Do you serve all of Boerne?
Yes — our crews cover Boerne's 3 ZIP codes across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch, plus the surrounding communities.
How soon can you schedule wood-to-gas fireplace conversion in Boerne?
We offer same-week scheduling across Boerne, booked by a real person in under two minutes, 7 AM to midnight every day.
Why do Boerne homes need wood-to-gas fireplace conversion?
Boerne is a historic Hill Country town in Kendall County — a German-rooted Main Street and luxury Cordillera Ranch estates. Period masonry repointing and clay-liner relining meet large custom-home fireplace work and rural spark-arrestor service. On every one, the hearth is the visual anchor of the living space — and we service it like one. Wood-to-Gas Fireplace Conversion is part of keeping that local housing stock safe, efficient, and up to code.
How much does wood-to-gas fireplace conversion cost in Boerne, TX?
Wood-to-Gas Fireplace Conversion in Boerne starts from $2,250, but the honest number depends on what a craftsman finds on site — we won't quote premium work blind. A CSIA-certified technician inspects the actual condition, then hands you an itemized, transparent written quote tied to the findings and built to one national standard. No teaser pricing, no surprises. Call (469) 992-4912 for a free, no-pressure Boerne quote.
Do you offer emergency or same-day wood-to-gas fireplace conversion in Boerne?
Yes — we run same-week and emergency wood-to-gas fireplace conversion across Boerne, scheduled by a real person 7 AM to midnight every day. For an active chimney hazard, call (469) 992-4912 and we prioritize Boerne dispatch so a craftsman is on it fast.
Is there a CSIA-certified wood-to-gas fireplace conversion company near me in Boerne?
Our Boerne crew lives in and works the metro across Kendall County, including Hill Country Village, Esperanza, Cordillera Ranch — a certified, local wood-to-gas fireplace conversion team genuinely near you, holding the same national craftsmanship standard on every job, not dispatched cold from another city. Call (469) 992-4912.
Last reviewed:
Talk to a CSIA-certified expert today.
Free written quote. Same-week scheduling. 24/7 emergency response when you need it.
24/7 Response
Active leak, animal in flue, post-fire damage, or smoke event? Real humans on the line 7 AM to 12 AM every day — replies in under 2 minutes. Tech dispatch within 2 hours during business hours, subject to crew availability after-hours.
Emergency line